 |
 |
 |
 |
|||
| HOME | Hollowcore | Stairs & Landings | Beam & Block | |||
|
Introduction
Technical details
Span load tables
Introduction
Technical details
Introduction
Technical details
Design Installation Site Safety Rhino Precast Ltd |
Stairs & Landings Technical DetailsRhino Precast can provide stair designs for customer approval prior to manufacture. All staircases achieve a minimum of 1 hour fire resistance. Rhino Precast Ltd offer precast stairs and landings to suit most combinations of architectural design. Stair dimensions will be in accordance with the client's specifications which should comply with the requirements of the Building Regulations Approved Documents B, K & M. and are then submitted for approval prior to manufacture. Precast components are designed and manufactured to suit the building before leaving the factory. Speed of construction reduces risk and cuts costs. Installation is rapid providing instant safe access between floor levels. Stairs and Landings are manufactured in moulds which produce Type A finishes as described in clause 6.2.7.3 of BS8110 part 1 1997. We do recommend that finishes are applied to the units after installation. The precast units will require some making good and the Lifting Points will need grouting in after installation. Each precast stair and landing unit will have between two and four lifting points for off-loading and placing the units.BenefitsWe provide a comprehensive design service which includes, Working Drawings, Reinforcement Drawings and full supporting calculations. Save time and money by eliminating expensive formwork and temporary propping associated with insitu stairs. Precast Stair units provide immediate access between floor levels. All units are bespoke manufactured to suit your exact requirements, size, shape, profile and pitch.QualityWe are a quality registered company ISO 9001. Customers can be reassured that all aspects of our production and design have been found to achieve the highest levels of quality and competence.FinishesAll units are manufactured on Steel Ramps or in high quality timber moulds. We can provide a variety of finishes but in general all formed surfaces give a type "A" finish to BS8110: part 1 1997. All uniformed surfaces are a high quality steel floated finish.DesignAll units are designed and manufactured in accordance with BS8110.LiftingAll precast components are manufactured with cast in lifting anchors to facilitate safe lifting. |
| Site copyright 2008 - Rhino Precast Ltd. No part of this website, including any text, images or source-code may be reproduced without prior permission from Rhino Precast Ltd. |
| Designed and hosted by Sarcophagus Ltd. |